BJRBJ - ION EXCHANGE COMPOUND

Product Identification

Product ID:ION EXCHANGE COMPOUND
MSDS Date:02/05/1982
FSC:6810
NIIN:00-111-0567
MSDS Number: BJRBJ

Responsible Party
BRO TECH CORP, DBA PUROLITE CO
150 MONUMENT RD
BALA-CYNWYD, PA 19004-1713
US

Emergency Phone: 215-668-9090

Info Phone: 215-668-9090

Cage: KO104

Contractor
THE PUROLITE CO, DIV OF BRO TECH CORPORATION
BALA-CYNWYD, PA 19004-1713 US

Telephone: 610-668-9090

Cage: 67168

Ingredients

ION EXCHANGE RESIN

Fraction By Weight: 100%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: LIKE OTHER FOREIGN BODIES,
PARTICLES MAY CAUSE MECHANICAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. CONSULT PHYSICIAN IF IRRITATION PERSISTS. INGEST: CALL MD
IMMEDIATELY .

Fire Fighting

Extinguishing Media:CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND, SCBA
AND FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALLY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP AND
TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49C (120F) AND ABOVE 0C (32F).

Exposure Controls

Respiratory Protection:NONE
Ventilation:NORMAL PLANT VENTILATION.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:WASH HANDS FREQUENTLY AND THOROUGHLY DURING
CONTACT AND AT END OF WORKDAY .
Supplemental Safety and Health
SPECIFICATION NUMBER: MIL-R-24119B(SH) CL7 GR1.

Chemical Properties

pH:5-7
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER SPHERICAL BEADS WITHOUT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH CONCENTRATED NITRIC ACID, OR STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES OVER 220 (428F).
Hazardous Decomposition Products:SO*2, SO*3, CO, CO*2, STYRENE MONOMER,
DIVINYLBENZENE.

Disposal

Waste Disposal Methods:THIS MATERIAL CAN BE DISPOSED OF AS ORDINARY
TRASH.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.